Aeratron is the design team behind these fans originating from Australia and now selling worldwide.
Aeratron works with the leading fan manufacturer producing more than 90% of all high end fans sold in the US market
We do offer extension kits which allow for sloped ceilings. Please read the specification sheets (download) for further information.
Aeratron fans use DC motors and need the remote control to control the receiver for the motor. We developed an electronics kit for the use of wall switches which will be launched soon.
We developed an electronics kit for Home Automation systems/Building Management systems which will be available soon.
!!Please always use a certified electrician to do the installation!!
Please follow the user manual during installation. We recommend to not use more than 8 fans per power circuit. If you experience difficulties during installation, please see below for trouble shooting.
(please always use a certified electrician for installation)
· Programming the fans: If installing multiple fans with different settings, please make sure that all fans are disconnected to power while only “programming” the fan in question.
· If you experience difficulties with the receiver or motor, please make sure that all cables are properly connected to the connectors. It might happen that during installation a cable becomes loose with be obvious (visually not detectable). “Twiggle” all cables back into the connector and reprogram again. It is also recommended to use a different “deep Switch” code.
We currently change our product range and will re-open the online store soon
Please contact your local distributor for further information.